Home

UV8010 high tensile hard liquid

The main components are UV polymer resin, initiation additive, wetting and leveling additive, etc. UV8010 has the characteristics of high stretching and high hardness, with a stretching rate of 200-220%, which can achieve good injection molding effect while maintaining good mechanical properties. PMMA, PC, PET plates and films can be kept transparent/excellent weather resistance for a long time.

Product Consulting

18030106835

Intent Message

UV8010 high tensile hard liquid manual

Product Description:

The main ingredient isUV polymer resin, initiation additives, wetting and leveling additives, etc;UV8010 It has the characteristics of high stretch and high hardness, the stretch rate is 200-220%, which can achieve a good injection molding effect while maintaining good mechanical properties;Can makePMMA, PC, PET sheet and film long-term transparent/excellent weather resistance.

Advantage Features:

1.UV8010 has the characteristics of high stretch and high hardness, with a stretch rate of 200-220%, which can achieve good injection molding effect while maintaining good mechanical properties;

2. Can make PMMA, PC, PET sheet and film long-term transparent/excellent weather resistance.

Main ingredients and scope of use:

1. The main components are UV polymer resin, initiation additives, wetting and leveling additives, etc;

2. For PMMA, PC, PET film stretch molding, as well as the surface of the hard, wear-resistant anti-scratch protection.

Process Guide:

1. Construction method: roller coating, shower coating, spraying;

2. Environment: humidity below RH60%, temperature 20±2 ℃, dust-free grade 1000 (recommended: dust-free grade of coating head part: 100, dust removal with dust roller before coating);

3. Line speed: When the speed of roller and conveyor belt is greater than 6 m/min, the surface leveling of the strengthening liquid is better;

4. Drying: infrared drying, temperature 80 ℃, more than 3min after UV curing, better hardness and wear resistance;

5. Curing: 600-1000mj/cm²;

6. Use 0.5-2 micron precision circulation filtration.

Data indicators:

	Item Objective	ASTM	Unit	UV8010	Preparation Note
Coating materials	Appearance			Transparent
	Density	D1475	G/mL	0.95~1.00	25℃
	Viscosity	D2196	cps	180-200	ULA/100rpm,25℃
	Solid content		%	100	SolventBAC,IPA
Film formation after curing	Thickness	D4138	μm	≤10.0
	Light transmittance	D1003	%	>90	UV/VIS Spectrophotometer
	Haze	D1003		<0.5	UV/VIS Spectrophotometer
	Adhesion	D3359	－	5B	3M 810 tape test 3 times
	Boiling resistance			OK	100 ℃,60min
	Scratch resistance	0000#	－	No change	500g load，5Times
	Resistance to damp heat			No change	720hrs,40℃,100% RH
	Pencil hardness	D3363	－	HB	PET，500g，load
	Tensile rate		%	200-220	No cracking after stretching

Packaging storage:

1. Packing: 20kg paint special environmental protection barrel

2. Storage: low temperature and dry environment, strictly sealed and protected from light; below 25 ℃, the shelf life is 6 months.

Note:

1. Should be in a low temperature dry environment, placed in a strictly sealed container, isolated from ultraviolet light, dark preservation;

2. Storage below zero may cause abnormal quality.

Limited Liability (please read carefully):

The Company ensures that the information provided above is accurate. However, because the conditions and methods of using our products are beyond our control, this information is not a substitute for customer testing to ensure that the products are safe, effective and fully satisfactory for a particular end use. We specifically disclaim any other express or implied warranties of fitness or merchantability for a particular purpose and are not responsible for any indirect or incidental damages.