The main components are UV polymer resin, initiation additive, wetting and leveling additive, etc. UV8010 has the characteristics of high stretching and high hardness, with a stretching rate of 200-220%, which can achieve good injection molding effect while maintaining good mechanical properties. PMMA, PC, PET plates and films can be kept transparent/excellent weather resistance for a long time.

UV3548 type dual curing and hard liquid

UV3548 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3548 has dual curing characteristics, which can be rolled up after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.

UV3547M05 type double curing hard liquid

UV3547M05 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3547M05 has dual curing characteristics, which can be rolled up and absorbed after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.

UV3546 type dual curing and hard liquid

UV3546 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3546 has dual curing characteristics, which can be rolled up and sucked up after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.

< 1...5 6 7...9 >

Products

UV8010 high tensile hard liquid

UV3548 type dual curing and hard liquid

UV3547M05 type double curing hard liquid

UV3546 type dual curing and hard liquid

< 1...5 6 7...9 >