-
-
-
-
Contact Us
SULOTION
Solution
AS960 Antistatic Antipermeability Liquid
Antistatic and anti-reflective coatings for optical sheets and film surfaces to protect electronic components, chips, liquid crystal modules and other precision electronic products to improve the clarity and reliability of quality inspection.
AF2200 antibacterial and anti-fingerprint liquid
Both anti-fingerprint and anti-bacterial properties, for daily frequent use and touch scenes, provide long-lasting stain resistance and anti-bacterial properties.
AR946 Photovoltaic Glass Coating Solution
AR946 coating anti-permeable liquid, used for photovoltaic glass anti-reflection, anti-reflection, improve the power generation efficiency of photovoltaic modules; at the same time, superior weather resistance, up to more than 25 years.
UV8020 high tensile hard liquid
The main components are UV polymer resin, initiation additive, wetting and leveling additive, etc. UV8020 has the characteristics of high stretching and high hardness, with a stretching rate of 120-150%, which can achieve good injection molding effect while maintaining good mechanical properties. PMMA, PC, PET plates and films can be kept transparent/excellent weather resistance for a long time.
UV8010 high tensile hard liquid
The main components are UV polymer resin, initiation additive, wetting and leveling additive, etc. UV8010 has the characteristics of high stretching and high hardness, with a stretching rate of 200-220%, which can achieve good injection molding effect while maintaining good mechanical properties. PMMA, PC, PET plates and films can be kept transparent/excellent weather resistance for a long time.
UV3548 type dual curing and hard liquid
UV3548 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3548 has dual curing characteristics, which can be rolled up after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.
UV3547M05 type double curing hard liquid
UV3547M05 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3547M05 has dual curing characteristics, which can be rolled up and absorbed after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.
UV3546 type dual curing and hard liquid
UV3546 type dual curing and hard liquid is a UV curing coating after thermal curing. The main components are UV polymer resin, monomer and diluent. UV3546 has dual curing characteristics, which can be rolled up and sucked up after thermal curing. Photocuring can make PMMA, PC, PET plates and films have higher surface hardness and wear resistance, and ensure transparency/excellent weather resistance for a long time.
Social Media
TikTok
Channels
Contact Information
Address: Unit 502, 5th Floor, West Side, No.12 Haijing East Road, Xiamen Area, China (Fujian) Pilot Free Trade Zone
Technical Services: 18030106835
E-mail: Support@winlight.tech
Company Phone: 0592-5201826
All Rights Reserved © 2024 Xiamen Winlight Technology Innovation Group Co., Ltd.
