Mainly composed of silicone resin and alcohol solvent, used for polycarbonate (PC); Wear resistance can meet the requirements of European customers, sand falling experiment E/ECE/324 Regulation No.22,Reduced of Abraded Sample Luminance is less than 5; On the premise of ensuring the flexibility of the lens, the wear resistance can be improved as much as possible, up to about 2.5.

STC2200 series strengthening solution

It is mainly composed of silicone resin and alcohol solvent and is used for polycarbonate (PC). Due to the refractive index of the cured coating, it is close to the refractive index of PC, so that no rainbow will be generated after the surface of PC is strengthened.

STC2040 hardening fluid

The main components of silicone resin, alcohol solvent, propylene glycol methyl ether solvent; good adhesion to PC; refractive index matching with PC, no multicolored after strengthening; has good wear resistance.

RP5830 primer

The main components are polyurethane resin, alcohol solvent and propylene glycol methyl ether solvent. It has good adhesion to PCTG(tritan), PC, TAC and PA substrates, excellent chemical resistance and good flexibility.

STC2580 hardening fluid

STC2580 plus hard liquid for nylon lens surface reinforcement, ultra-low rainbow pattern; so that it has good wear resistance, scratch resistance.

STC6800 hardening fluid

Mainly composed of silicone resin and thinner, used for surface reinforcement of nylon lenses, so that it has higher surface hardness and excellent wear resistance.

STC5680 hardening fluid

Good adhesion to PCTG(tritan) substrate; low rainbow pattern; good abrasion resistance, scratch resistance; excellent chemical resistance.

STC2520 hardening fluid

STC2520 can make the PC sheet up to H(500g) surface hardness, lower rainbow pattern; excellent wear resistance, scratch resistance.

STC2268 hardening fluid

Can make PC lens long-term transparent/excellent weather resistance; Good abrasion resistance, scratch resistance.

STC2260PC strengthening solution

Mainly composed of silicone resin and alcohol solvent, used for polycarbonate (PC). It has higher flexibility than general PC strengthening solution.

STC1200 hardening fluid

The main components are silicone resin and alcohol solvent. The surface hardness of PMMA lens can reach up to 4H(500g), transparent/excellent weather resistance, excellent abrasion resistance and scratch resistance.

T1590 Hardening fluid

T1560 Hardening fluid

The main components are silicone resin, alcohol solvent, propylene glycol methyl ether solvent; good adhesion to PCTG; refractive index matching with PCTG, no multicolored pattern after strengthening; has good wear resistance.

T1520 Hardening fluid

The main components are silicone resin, alcohol solvent, propylene glycol methyl ether solvent; have good adhesion to PA; refractive index match with PA, no multicolored pattern after strengthening; have good wear resistance.

T1490 Hardening fluid

The main components are organic silicon resin, alcohol solvent, propylene glycol methyl ether solvent; good adhesion to AC and PC; refractive index matching with AC, no multicolored pattern after strengthening; good wear resistance.

AS975 Antistatic Antipermeability Liquid

Antistatic and anti-reflective coatings for optical sheets and film surfaces to protect electronic components, chips, liquid crystal modules and other precision electronic products to improve the clarity and reliability of quality inspection.

AS960 Antistatic Antipermeability Liquid

AF2200 antibacterial and anti-fingerprint liquid

Both anti-fingerprint and anti-bacterial properties, for daily frequent use and touch scenes, provide long-lasting stain resistance and anti-bacterial properties.

AR946 Photovoltaic Glass Coating Solution

AR946 coating anti-permeable liquid, used for photovoltaic glass anti-reflection, anti-reflection, improve the power generation efficiency of photovoltaic modules; at the same time, superior weather resistance, up to more than 25 years.

UV8020 high tensile hard liquid

The main components are UV polymer resin, initiation additive, wetting and leveling additive, etc. UV8020 has the characteristics of high stretching and high hardness, with a stretching rate of 120-150%, which can achieve good injection molding effect while maintaining good mechanical properties. PMMA, PC, PET plates and films can be kept transparent/excellent weather resistance for a long time.

< 1 2 >

Products

STC3505 helmet lens special PC strengthening solution